MeshCore/RepeaterMountingOptions
Mounting Repeaters
Mounting repeaters securely is critical for good performance and long-term reliability. The goal is always to place the antenna as high as possible with clear line-of-sight, while ensuring the mount can withstand wind and weather.
Remember: Height is might — the higher the node, the better connection you will get to the mesh.
Mounting Options
1. Pole Mount
The most common method is using a standard pole and clamp system.
- Simple to set up with widely available hardware.
- Can be attached to an existing mast, tower, or sturdy pole.
- Best suited for permanent installations where height and stability are required.
Examples of pole mounts:
Pole mount Alfa 5.8dBi Antenna:
- Stéphane P created this 3D print to allow pole mounting of the Alfa 5.8 dBI Antenna
- Download STL
2. Gutter Mount
Community member Aussiemandias designed a specialized 3D printable gutter mount for quick and discreet repeater installation.
- Ideal for residential areas where pole mounting isn’t practical.
- Attaches directly to house gutters without the need for drilling into walls.
- Provides a stable base while keeping the antenna elevated.
Notes
- Regardless of mount type, always ensure the mount and fasteners are weather-rated and can handle local wind conditions.
- Periodically inspect mounts for wear, corrosion, or loosening.
- These options are specifically for the recommended solar repeater build,
- Linked here: Solar Node – Recommended Enclosure.