MeshCore/RepeaterMountingOptions: Difference between revisions
Jump to navigation
Jump to search
ElDoctorWar (talk | contribs) →Mounting Repeaters: Added image previews, added image to pole mount |
ElDoctorWar (talk | contribs) →1. Pole Mount: Added pole examples |
||
| Line 22: | Line 22: | ||
** [https://docs.rakwireless.com/product-categories/wisblock/rakbox-uo180x130x60/installation-guide/#mounting-guide Mounting Guide] | ** [https://docs.rakwireless.com/product-categories/wisblock/rakbox-uo180x130x60/installation-guide/#mounting-guide Mounting Guide] | ||
* [https://www.aliexpress.com/item/1005004943650198.html AliExpress – Pole Clamp Option 2] | * [https://www.aliexpress.com/item/1005004943650198.html AliExpress – Pole Clamp Option 2] | ||
Examples of poles: | |||
* [https://www.princessauto.com/en/4-ft-army-tent-pole/product/PA0009280777 Princess Auto - 4ft Army Tent Pole] | |||
** Can be linked together to increase pole length (ensure proper anchoring) | |||
* [https://www.homedepot.ca/product/paulin-3-4-x-36-inch-round-steel-tube/1000126774 3/4 x 36-inch steel tube] | |||
Pole mount Alfa 5.8dBi Antenna: | Pole mount Alfa 5.8dBi Antenna: | ||
* Stéphane P created this 3D print to allow pole mounting of the Alfa 5.8 dBI Antenna | * Stéphane P created this 3D print to allow pole mounting of the Alfa 5.8 dBI Antenna | ||
[[File:PoleMount.jpg|frameless]|300px]] | [[File:PoleMount.jpg|frameless]|300px]] | ||
* [https://drive.google.com/file/d/1wIU9kLxolzM9vPUB35ETY1sCPLGvtfFu/view?usp=share_link Download STL] | * [https://drive.google.com/file/d/1wIU9kLxolzM9vPUB35ETY1sCPLGvtfFu/view?usp=share_link Download STL] | ||
=== 2. Gutter Mount === | === 2. Gutter Mount === | ||
Latest revision as of 13:46, 17 October 2025
Mounting Repeaters
Mounting repeaters securely is critical for good performance and long-term reliability. The goal is always to place the antenna as high as possible with clear line-of-sight, while ensuring the mount can withstand wind and weather.
Remember: Height is might — the higher the node, the better connection you will get to the mesh.
Mounting Options
1. Pole Mount
The most common method is using a standard pole and clamp system.
- Simple to set up with widely available hardware.
- Can be attached to an existing mast, tower, or sturdy pole.
- Best suited for permanent installations where height and stability are required.
Examples of pole mounts:
Examples of poles:
- Princess Auto - 4ft Army Tent Pole
- Can be linked together to increase pole length (ensure proper anchoring)
- 3/4 x 36-inch steel tube
Pole mount Alfa 5.8dBi Antenna:
- Stéphane P created this 3D print to allow pole mounting of the Alfa 5.8 dBI Antenna
![frameless]](/index.php?title=File:PoleMount.jpg)
2. Gutter Mount
Community member Aussiemandias designed a specialized 3D printable gutter mount for quick and discreet repeater installation.
- Ideal for residential areas where pole mounting isn’t practical.
- Attaches directly to house gutters without the need for drilling into walls.
- Provides a stable base while keeping the antenna elevated.
![frameless]](/index.php?title=File:RAKUnify_GutterMounted.jpeg)
3. Vent Pipe Extension Mount
- Standard 3 foot ABS pipe from Home Depot, 3" in diameter.
- ABS cement on the one side attached to the extension and on the side attached to the house two self-tapping screws in both sides as a safety measure, which allows removal in the future.
Notes
- Regardless of mount type, always ensure the mount and fasteners are weather-rated and can handle local wind conditions.
- Periodically inspect mounts for wear, corrosion, or loosening.
- These options are specifically for the recommended solar repeater build, linked here: Solar Node – Recommended Enclosure.