MeshCore/RepeaterMountingOptions

← Home / Hardware

Mounting Repeaters

Mounting repeaters securely is critical for good performance and long-term reliability. The goal is always to place the antenna as high as possible with clear line-of-sight, while ensuring the mount can withstand wind and weather.

Remember: Height is might — the higher the node, the better connection you will get to the mesh.

Mounting Options

1. Pole Mount

The most common method is using a standard pole and clamp system.

• Simple to set up with widely available hardware.
• Can be attached to an existing mast, tower, or sturdy pole.
• Best suited for permanent installations where height and stability are required.

Examples of pole mounts:

• Amazon – Adjustable Pole Mount
• AliExpress – Pole Clamp Option 1
  • Mounting Guide
• AliExpress – Pole Clamp Option 2

Pole mount Alfa 5.8dBi Antenna:

• Stéphane P created this 3D print to allow pole mounting of the Alfa 5.8 dBI Antenna
• Download STL

2. Gutter Mount

Community member Aussiemandias designed a specialized 3D printable gutter mount for quick and discreet repeater installation.

• Ideal for residential areas where pole mounting isn’t practical.
• Attaches directly to house gutters without the need for drilling into walls.
• Provides a stable base while keeping the antenna elevated.

🔗 View Image

• Download STL

3. Vent Pipe Extension Mount

• Standard 3 foot ABS pipe from Home Depot, 3" in diameter.
• ABS cement on the one side attached to the extension and on the side attached to the house two self-tapping screws in both sides as a safety measure, which allows removal in the future.

🔗 View Image

Notes

• Regardless of mount type, always ensure the mount and fasteners are weather-rated and can handle local wind conditions.
• Periodically inspect mounts for wear, corrosion, or loosening.
• These options are specifically for the recommended solar repeater build, linked here: Solar Node – Recommended Enclosure.