MeshCore/Frequency Settings: Difference between revisions

From Ottawa Mesh
Jump to navigation Jump to search
No edit summary
No edit summary
 
(2 intermediate revisions by the same user not shown)
Line 1: Line 1:
[[Main Page|← Home]] / [[Meshtastic|Meshtastic]]
__NOTOC__
[[Main Page|← Home]]


'''Frequency Settings (Ottawa):''' 910.525 MHz / BW: 62.5 kHz / SF: 7 / CR: 5
= MeshCore Frequency Settings =
 
MeshCore developers have published recommended frequency settings that balance performance and avoid congestion in the ISM band, which is often busy with IoT devices such as smart meters. 
Ottawa follows the new recommended defaults for US/CAN.
 
'''Ottawa MeshCore Settings:''' 
* '''Frequency:''' 910.525 MHz  
* '''Bandwidth:''' 62.5 kHz  
* '''Spreading Factor (SF):''' 7  
* '''Coding Rate (CR):''' 5
 
All nodes in Ottawa should use these settings.

Latest revision as of 19:51, 21 August 2025

← Home

MeshCore Frequency Settings

MeshCore developers have published recommended frequency settings that balance performance and avoid congestion in the ISM band, which is often busy with IoT devices such as smart meters. Ottawa follows the new recommended defaults for US/CAN.

Ottawa MeshCore Settings:

  • Frequency: 910.525 MHz
  • Bandwidth: 62.5 kHz
  • Spreading Factor (SF): 7
  • Coding Rate (CR): 5

All nodes in Ottawa should use these settings.