MeshCore/Repeaters: Difference between revisions
ElDoctorWar (talk | contribs) →Better Antenna – Tested & Recommended: Replaced HOgarden with ALFA |
ElDoctorWar (talk | contribs) mNo edit summary |
||
| Line 34: | Line 34: | ||
| Antenna | | Antenna | ||
| ALFA AOA-915-5ACM | | ALFA AOA-915-5ACM | ||
| $ | | $29.52 | ||
| [https://www.amazon.ca/dp/B08H8J6ZV6 Link] | | [https://www.amazon.ca/dp/B08H8J6ZV6 Link] | ||
|- | |- | ||
Revision as of 18:36, 6 October 2025
Repeaters form the stable backbone of the Ottawa MeshCore network. Below are two main options for getting started: Pre-Built or Build Your Own While pre-built devices can be convenient, we strongly recommend building your own repeater for the best reliability, flexibility, and long-term maintainability.
Important Note for RAK-Based Repeaters
If you plan to use a RAK board for a repeater, please update it to the OTAFIX bootloader firmware. Without this fix, if an OTA update fails over BLE, the repeater will end up in an unusable state and require physical intervention.
Download the OTAFIX firmware here: OTAFIX Bootloader UF2 File
Build Your Own
A robust build using a purpose-built weatherproof enclosure.
| Item | Product Name | Cost (CAD) | Link |
|---|---|---|---|
| Enclosure | WisMesh Unifiy Enclosure 910422 | $72.50 | Link |
| LoRa Board (Small) | RAK WisBlock RAK19003/RAK4631 (Type 6) | $36.38 | Link |
| Antenna | ALFA AOA-915-5ACM | $29.52 | Link |
| Antenna Coax Cable | N Female to IPX | $6.79 | Link |
| Battery | 3000mAh + Battery | $16.00 | Link |
| Battery Protection | VoltaicEnclosures Li-ion PCM | $7.50 | Link |
| Vent | Waterproof Vent Plug (M12X1.5-10) | $6.12 | Link |
Approximate total cost: $173.03 CAD
Better Antenna – Tested & Recommended
This antenna setup has been tested by a local RF enthusiast and showed great results for the price.
| Item | Product Name | Cost (CAD) | Link |
|---|---|---|---|
| Better Antenna | ALFA Network AOA-915-5ACM | $29.52 | Link |
| Antenna Coax Cable – Node to Enclosure Mount | N Female to IPX | $6.79 | Link |
| Antenna Mount (if mounted separately) | Double Antenna Mast Clamp | $19.99 | Link |
| Antenna Cable – Enclosure to Antenna (if mounted separately) | N Male to N Male Cable (12") — shorter = better | $??? | [Placeholder] |
Better Antenna – May Not Be Worth the Cost
This alternative antenna is more expensive and may not provide significantly better performance compared to the option above.
| Item | Product Name | Cost (CAD) | Link |
|---|---|---|---|
| Better Antenna | Rokland Fibreglass 8 dBi | $74.59 | Link |
| Antenna Coax Cable – Node to Enclosure Mount | N Female to IPX | $6.79 | Link |
| Antenna Cable – Enclosure to Antenna (if mounted separately) | N Male to N Male Cable (12") — shorter = better | $??? | [Placeholder] |
| Antenna Adapter – Enclosure to Antenna (if mounted directly) | N Male to N Male Connector | $13.00 | Link |
Pre-Built
These options come fully assembled; just flash MeshCore and mount them in a high location to expand the mesh. We still recommend upgrading the antenna for best performance. Ideally, use an N-Type connector and upgrade to at least the ALFA AOA-915-5ACM.
NOTE: These pre-built repeaters have not been thoroughly tested by the Ottawa community, but we have seen reports of others using them with great success.
| Product | Notes | Link |
|---|---|---|
| SenseCAP Solar Node P1 Pro | Solar-powered communication node integrating the XIAO nRF52840 Plus controller and Wio-SX1262 LoRa module.
Comes with a 5W solar panel, IPX5 waterproof rating, 4×18650 (3350 mAh each) lithium batteries, and a 2 dBi rubber antenna. Batteries support both Type-C and solar charging. Includes onboard GPS (XIAO L76K). |
Link |
| WisMesh Solar Repeater Mini | Compact outdoor repeater built around the RAK4631 (nRF52840 + SX1262) core module with a WisBlock mini base board.
Housed in an IP67-rated Unify enclosure with integrated solar panel, 3200 mAh Li-ion battery, and a WisMesh blade antenna (902–928 MHz). |
Link |