MeshCore/Heltekv3Wifi

Compiling MeshCore Firmware with Wi-Fi Enabled

Device: These instructions are specifically for the Heltec V3 device. OS: This guide was completed on Red Hat 9.6.

Note: Wi-Fi in MeshCore is an experimental feature. Your SSID and password are embedded at compile time. Do not share compiled binaries publicly if they contain your real credentials.

Install PlatformIO

cd ~
curl -fsSL -o get-platformio.py https://raw.githubusercontent.com/platformio/platformio-core-installer/master/get-platformio.py
python3 get-platformio.py 
export PATH=$PATH:/home/linuxuser/.platformio/penv/bin

Clone the MeshCore Repository

git pull https://github.com/ripplebiz/MeshCore.git
git clone https://github.com/ripplebiz/MeshCore.git
cd MeshCore/

Configure Wi-Fi Credentials

Edit the PlatformIO configuration for the Heltec V3 Wi-Fi build:

vi variants/heltec_v3/platformio.ini

Find the following section and update with your SSID and password:

[env:Heltec_v3_companion_radio_wifi]
extends = Heltec_lora32_v3
build_flags =
  ${Heltec_lora32_v3.build_flags}
  -D MAX_CONTACTS=100
  -D MAX_GROUP_CHANNELS=8
  -D DISPLAY_CLASS=SSD1306Display
  -D WIFI_DEBUG_LOGGING=1
  -D WIFI_SSID="<<SSID>>"
  -D WIFI_PWD="<<WIFI-PASS>>"

Build the Firmware

set FIRMWARE_VERSION=1.7.3
./build.sh build-firmware Heltec_v3_companion_radio_wifi

Rename and Move the Firmware

cd .pio/build/Heltec_v3_companion_radio_wifi/
mv firmware-merged.bin Heltec_v3_companion_radio_wifi_1.7.3.bin
mv Heltec_v3_companion_radio_wifi_1.7.3.bin /home/linuxuser/

Next Steps

• Flash the compiled firmware (``Heltec_v3_companion_radio_wifi_1.7.3.bin``) onto your Heltec V3 device using your preferred flashing tool.
• Monitor serial output to confirm Wi-Fi association and connectivity.
• Remember this is experimental — expect instability.